APPLICATIONS

COMPANIES THAT TRUST

APPLIED THERMAL SOLUTIONS

STEAM APPLICATIONS DESIGNED FOR THE

ULTIMATE HEATING
CONVENIENCE AND
EFFICIENCY

Meet all of your thermal requirements better than conventional storage tank heaters and hydronic heaters can:

  • Reduce your steam loads and your maintenance costs
  • No main circulation pump that heats up your mechanical room
  • 100% closed loop: NO flash steam lost
  • Generate FREE electric power through steam
  • Condensing steam boiler at 95%+ efficiency
  • Get extra LEED Points
  • Energy saving between 5 to 15%
  • Applicable for both high and low-pressure steam
  • No steam pressure reducing valve station
  • No need for a steam safety valve
  • No dedicated condensate pump and no flash tank
  • Easy installation with very low footprint and low maintenance
  • Up to 6x less corrosive on condensate piping

OUR INNOVATIVE STEAM APPLICATIONS

Steam Water Heater:

Faster, Stronger, and More Cost-Efficient Solution to Domestic Hot Water

Gone are the days when you have to work around bulky and costly storage tank heaters just to get domestic hot water.

You don’t have to worry anymore about your facility’s floor space being eaten up by a 2000-gallon storage tank heater, which costs you thousands of dollars, when you can have our convenient 16-square foot Steam Water Heater do it better!

Our Steam Water Heater is small enough that all you have to do is wheel it into your mechanical rooms, pipe it up with your existing tank, and watch it achieve your thermal goals in the fastest time possible. Absolute minimal downtime secured!

Energy-efficient heating systems are usually costly to install. With our system, you get to save more because our setup doesn’t require pressure reducing valve stations or dedicated condensate pumps.

This means you can save up to 40% off the total installation costs!

Our Steam Water Heater is perfect for:

Domestic Hot Water

Heating water / Glycol for building heat

Hot oil or other heat transfer fluids

Wash stations

Emergency showers

Reactors, Pasteurizers, and Jacketing

Steam Building Heat System:

Get All The Heat You Need In The Smallest Possible Footprint

Our Steam Building Heat System is designed to get you the building heat you need in the smallest footprint possible.

Each system is carefully engineered for your project’s specific technical requirements. Liquid flow installations are available between 35-80 USGPM and can go higher than 2000 USPGM per heat exchanger.

What’s included in our Steam Building Heat System:

Domestic Hot Water

Heating water / Glycol for building heat

Hot oil or other heat transfer fluids

Wash stations

Emergency showers

Reactors, Pasteurizers, and Jacketing

Air separator

Condensate control valve, strainer and steam trap

Steam inlet main automated steam shut-off valve and start-up valve (fail closed)

Manual and automated isolation valves as required

Optional items also available for skid mounting:

Expansion tank

Chemical pot feeder

Filter

Any specifics your project might need

Each control panel is pre-programmed and factory tested for functionality and lead/lag sequencing before shipment.

Our Steam Building Heat System is designed to ensure you’re in full control and will save you hundreds of hours of field wiring and programming.

Our thermal experts will be onsite to ensure seamless installation, make required adjustments, and make sure everything functions as it should.

We also offer free remote support during the equipment’s warranty period so that we can make required adjustments anytime you need it.

Clean Steam Generator:

Get Sterilized Steam For Your Sensitive Projects

Here are 3 reasons why you should use a Clean Steam Generator:

  • Sterilization
  • Humidification
  • Food process

If you have a sensitive project that requires that the process is free from chemicals,
sediments, and minerals, then using a Clean Steam Generator is your best bet.

Our Clean Steam Generator delivers 97% quality stream, meaning you only get 3%
moisture into your stream!

By using our Clean Steam Generator, you get huge energy savings because you don’t
have to inject steam from your boiler anymore:

You reduce softner usage

You use chemical treatment in extremely low quantities

You cut off over 50% of your steam boiler’s surface blowdown!

Steam Quality Controller:

Maintain 97%+ Steam Quality Every Single Time

Sterilizers require at least 97% steam quality for it to work properly.

With our Steam Quality Controller, this sterilizer problem is gone for good.

Our Steam Quality Controller system uses 100 PSIG high-pressure steam to give a small amount of superheat to your medium pressure steam, ensuring that you’re always in full control of your steam’s quality.

That’s because when you have a couple of degrees of superheat to your steam, then you know that you have a 100% quality steam!

OUR INNOVATIVE STEAM APPLICATIONS’
INNOVATIVE STEAM

With us, energy conservation is unparalleled.

There is no unit on the market more energy-efficient than our innovative steam design for steam-to-water heating.

It squeezes every practical BTU out of the steam and condensate, making sure you’re getting the maximum value out of your heating investment every single time!

Save 20% of energy usage at 125 PSIG steam, save 5.4% of energy usage at 15 PSIG steam

Lower installed cost than other fluid heaters

Utilize steam that is wasted by other heaters

Smaller footprint

NO dedicated condensate pump required

NO dedicated PRV station required

NO vacuum breaker required during normal operation

Control liquid leaving the temperature at ± 2F on building heat, at ± 4F on domestic

High-quality heat exchanger with ASME Stamp for high-pressure steam operations of 150 PSIG and more

APPLIED THERMAL
CERTIFICATIONS & AWARDS

Who’s Who In Health Care

June 2019 – Page 31

Need In-Depth Expert Thermal Solutions Advice?

Let our thermal solutions experts help you. No strings attached